0.6m 20W three defense line LED light for workshop

1.5m 60W 120lm/W IP65 Tri-Proof LED LightProduct Describtion: Model  LM-TRI06A-40WPower40WLuminous2000 LM                Input VoltageAC100-277VCRIRa>80CCT3000K /4000K/5000K/6000Knstallationsuspending,ceiling mounted,linkableLight Effica

Featured Products

1.5m 60W 120lm/W IP65 Tri-Proof LED Light
0.6m 20W Triproof Linear LED Light for Workshop

Product Describtion: 
Model  LM-TRI06A-40W
Luminous2000 LM                
Input VoltageAC100-277V
CCT3000K /4000K/5000K/6000K
nstallationsuspending,ceiling mounted,linkable
Light Efficacy100LM/W
IP RatingIP65
Warranty3-5 year limited

1.Tri-proof led fixture for IP65 waterproof,dust corrosion,and pressure-proof
2.Function design with imaginative appearence
3.High stability isolated driver
4.Excellent heat dissipation depending on whole aluminum housing
5.Widely use for ambient lighting application
6.Maxmium efficacy and minimum glare
7.High-tech optical design
8.No UV,No lead,No mercury
9.5 years warranty

0.6m 20W Triproof Linear LED Light for Workshop
0.6m 20W Triproof Linear LED Light for Workshop

Installation Instructions
1. Fixtures must be operated by a licensed electrician.
2. Check if fixtures are in good condition once the packaging is open.
3. Do not let fixture fall down from ceiling system or clash to hard staff.
4. Make sure that the cable of fixture is long enough to connect.Do not knot or pull the cable strongly.
5. Do connect input end of fixture to output end of LED driver.
6. Wiring must be firm and tight with insulation protection well.Be aware of electricity shock.
7. Keep fixture and LED driver away from water or liquid,free from electric leakage and eletricity shock.

0.6m 20W Triproof Linear LED Light for Workshop

Wide beam angle with good lighting distribution is quite suitable for warehouse lighting,outdoor lighting,parking lot lighting,work shop,all industrial lighting
0.6m 20W Triproof Linear LED Light for Workshop

Matters needing attention

 1.Before installing the lighting fixtures, please read this instruction manual carefully.
 2.The lighting fixtures should be installed, connected and tested by a certified installer based on the local regulations.
 3.Lamps should always be installed or replaced with care.
 4.Please check the local voltage in accordance with the product requirements before using the product.
 5.Relamping only can be done when the power is off and the lamp is completely cooled down.
 6.When a lamp is to be cleaned, make the power off and let it cool down completely.Clean the fixture with a soft cloth and a standard PH neutral detergent. Stainless steel finishing should be maintained regularly.
 7.Misuse of, or changes to the fixture shall nullify the guarantee.
 8.Don't cover the fixtures with flammable materials.
 9.Exclusively replaced by the manufacturer or his service agent or the similar qualified person in order to avoid a hazard.

Trouble Shooting
ProblemPossible CauseSolutions
Can not light upWrong or loose wiring connectionDouble check wiring methods, and connect in the right way. Do cut off electricity before wiring
Using wrong LED driverReplace it with adaptive LED driver
LEDs damaged or LED driver damagedRepair or replace it with new light source or LED driver
Blinking lightFixtures do not match  LED driver, or LED driver failsRepair or replace it with new driver.

Environmentally friendly
  (1) No glare, mercury, ultraviolet, infrared or other hazardous substances
  (2) Operating Temperature: -20ºC to +40ºC
  (3) Operating Humidity: 10% to 80%
  (4) Storage Temperature: -40 to +85 ºC
  (5) Storage Humidity: 10% to 80%

Q1.Can I have a sample order for LED light?
A:Yes.We welcome sample order to test and check quanlity.Mixed samples are acceptable.
Q2.What about the lead time?
A:Sample needs 3-5days,mass production time needs 1-2 weeks for order quantity more than.
Q3.Do you have any MOQ limit for LED light order?
A:Low MOQ 1pc for sample checking is avaiable.
Q4.How do you ship the goods and how long does it take to arrive?
A:We usually ship by DHL,FedEx or TNT.It usually takes 3-5 days to arrive.Airline and sea shipping also optional.
Q5:Is it ok to print my LOGO on LED light product?
A:Yes.Please inform us formally before our production and confirm the design firstly based on our samle.
Q6.Do you offer guarantee for the products?
A:Yes.We offer 2-5 years warranty to our producs.

0.6m 20W Triproof Linear LED Light for Workshop
Based in Shenzhen,Lumin Lighting is a fast-growing semiconductor lighting manufacturer and suppliers in
China.Lumin Lighting was founded on November 17,2008.Since its founding,Lumin Lighting is committed 
to developing,manufacturing and popularizing LED lighting products,responding to the government policy of
energy-saving,emission reduction,and maintainable development.

Lumin Lighting product lines mainly include LED Panel,LED downlight,LED bulbs,and outdoor lights.Meantime,
Lumin Lighting also provides customized lighting solutions to customers.

Lumin Lighting takes product quality as our lifeline.We focus on quality during thewhole production process
by seriously carrying out ISO 9001 Quality System and ISO Environment Management System.

Best Services
(1) Your inquiry will be replied within 12 hours.
(2) Fast sample deliverly:3 days around.
(3) Best-trained and experienced sales staffs follow up with your inquiries and orders.
(4) OEM/ODM services:all can be customized.
(5) Distributor,agent,investor and more are welcome.
(6) It can be 5-year limited warranty:spare parts can be offered along with orders.

Company Profile
0.6m 20W Triproof Linear LED Light for Workshop
0.6m 20W Triproof Linear LED Light for Workshop

0.6m 20W Triproof Linear LED Light for Workshop



Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours